Part Details | PRECISION NONWIRE WOUND VARIABLE RESISTOR
5905-01-054-4559 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Alternate Parts: 0N2416891, 0N241689-1, 5905-01-054-4559, 01-054-4559, 5905010544559, 010544559
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 21, 1978 | 01-054-4559 | 37407 ( RESISTOR, VARIABLE, NONWIRE WOUND, PRECISION ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL BUSHING MOUNTED
ROUND, FLATTED
Cross Reference | NSN 5905-01-054-4559
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0N241689-1 | 98230 | NATIONAL SECURITY AGENCY |
Technical Data | NSN 5905-01-054-4559
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 1 |
| ELECTRICAL RESISTANCE PER SECTION | 250.000 KILOHMS SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO +10.0 SINGLE SECTION |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| BODY DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| BODY LENGTH | 0.625 INCHES MAXIMUM |
| MOUNTING BUSHING LENGTH | 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND, FLATTED |
| FIRST FLAT LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FLAT HEIGHT | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SHAFT LENGTH | 0.562 INCHES NOMINAL |
| CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 32.5 MAXIMUM |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| NONTURN DEVICE LOCATION | AT 12 OCLOCK AND AT 3 OCLOCK |
| MOUNTING METHOD | STANDARD BUSHING |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.250 INCHES MAXIMUM |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TERMINAL LENGTH | 0.156 INCHES MINIMUM AND 0.186 INCHES MAXIMUM |
| TERMINAL LOCATION | REAR END |
| TEST DATA DOCUMENT | 98230-0N241689-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |