Part Details | INDUCTIVE WIRE WOUND FIXED RESISTOR
5905-01-096-1218 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
Alternate Parts: 9561411B, 956141-1B, SPR2029, 5905-01-096-1218, 01-096-1218, 5905010961218, 010961218
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 14, 1980 | 01-096-1218 | 37403 ( RESISTOR, FIXED, WIRE WOUND, INDUCTIVE ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-01-096-1218
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 956141-1B | 82577 | RAYTHEON COMPANYDBA RAYTHEON |
| SPR2029 | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
Technical Data | NSN 5905-01-096-1218
| Characteristic | Specifications |
|---|---|
| PRECIOUS MATERIAL AND LOCATION | BODY SURFACES GOLD |
| UNPACKAGED UNIT WEIGHT | 15.000 GRAMS |
| TEST DATA DOCUMENT | 82577-956141 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL LENGTH | 0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL TYPE | WIRE LEAD |
| BODY HEIGHT | 0.515 INCHES MINIMUM AND 0.545 INCHES MAXIMUM |
| BODY WIDTH | 0.530 INCHES NOMINAL |
| BODY LENGTH | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| STYLE DESIGNATOR | 42 AXIAL TERMINAL EACH END |
| INCLOSURE METHOD | ENCAPSULATED |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M150.0/P150.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| POWER DISSIPATION RATING IN WATTS | 16.000 HEAT SINK |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| ELECTRICAL RESISTANCE | 0.050 OHMS |