Part Details | INDUCTIVE WIRE WOUND FIXED RESISTOR
5905-01-114-6467 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
Alternate Parts: J165P1540A, 10160364, G363 154 OHMS 1PCT, G-3-63 154 OHMS 1PCT, 5905-01-114-6467, 01-114-6467, 5905011146467, 011146467
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 20, 1981 | 01-114-6467 | 37403 ( RESISTOR, FIXED, WIRE WOUND, INDUCTIVE ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-01-114-6467
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| J165P1540A | 07482 | GENERAL ELECTRIC COMPANYDBA GE |
| 10160364 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| G-3-63 154 OHMS 1PCT | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
Technical Data | NSN 5905-01-114-6467
| Characteristic | Specifications |
|---|---|
| END ITEM IDENTIFICATION | ENGINE,GAS TURBINE |
| SPECIFICATION/STANDARD DATA | 07482-J165 MANUFACTURERS SOURCE CONTROL |
| CUBIC MEASURE | 0.005 CUBIC INCHES |
| TERMINAL LENGTH | 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL TYPE | WIRE LEAD |
| BODY LENGTH | 0.437 INCHES MAXIMUM |
| BODY DIAMETER | 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| STYLE DESIGNATOR | 4 AXIAL TERMINAL EACH END |
| INCLOSURE METHOD | ENCAPSULATED |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M20.0/P20.0 |
| POWER DISSIPATION RATING IN WATTS | 2.000 FREE AIR |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| ELECTRICAL RESISTANCE | 154.000 OHMS |