Part Details | WIRE WOUND FIXED RESISTOR
5905-01-115-9455 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: 471NX160P4015OHM, 471NX-160P-40-15OHM, 9121725, 912172-5, NHL16015OHMPORM5PCT, NHL-160-15OHMPORM5PCT, NHL16007Z 15 OHMS 5%, NHL-160-07Z 15 OHMS 5%, 5905-01-115-9455, 01-115-9455, 5905011159455, 011159455
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 17, 1981 | 01-115-9455 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
TERMINALS ONE END
Cross Reference | NSN 5905-01-115-9455
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 471NX-160P-40-15OHM | 44655 | HEICO OHMITE, L.L.C.DBA OHMITE MANUFACTURING |
| 912172-5 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
| NHL-160-15OHMPORM5PCT | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
| NHL-160-07Z 15 OHMS 5% | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
Technical Data | NSN 5905-01-115-9455
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 15.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M5.000/P5.000 |
| POWER DISSIPATION RATING IN WATTS | 160.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M400.0/P400.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P350.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 0 TERMINALS ONE END |
| BODY DIAMETER | 0.906 INCHES MAXIMUM |
| BODY LENGTH | 3.938 INCHES MINIMUM AND 4.062 INCHES MAXIMUM |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SPECIAL FEATURES | UTILIZED ON TEST SET,POWER SUPPLYAN/USM-428,TM5-6675-309-24P |
| TEST DATA DOCUMENT | 06481-912172 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |