Part Details | FILM FIXED RESISTOR
5905-01-124-8454 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
Alternate Parts: 166259004, 166259-004, 166259004, 166259-004, 5905-01-124-8454, 01-124-8454, 5905011248454, 011248454
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 14, 1982 | 01-124-8454 | 05311 ( RESISTOR, FIXED, FILM ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-01-124-8454
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 166259-004 | 56200 | TYMSHARE INCCOMPUTER SUPPORT SERVICES DIV |
| 166259-004 | 18338 | XEROX CORPXEROX DOCUMENTATION AND SOFTWARE |
Technical Data | NSN 5905-01-124-8454
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 20.000 KILOHMS |
| RESISTANCE TOLERANCE IN PERCENT | M0.010/P0.010 |
| POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 60.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M10.0/P10.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P125.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 42 AXIAL TERMINAL EACH END |
| BODY LENGTH | 0.375 INCHES MAXIMUM |
| BODY WIDTH | 0.375 INCHES MAXIMUM |
| BODY HEIGHT | 0.200 INCHES MAXIMUM |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM |
| TEST DATA DOCUMENT | 18338-166259 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |