NSN 5915-00-482-7151

Part Details | BAND PASS FILTER

5915-00-482-7151 An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Alternate Parts: 361834, 5915-00-482-7151, 00-482-7151, 5915004827151, 004827151

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
59FEB 01, 197100-482-715100209 ( FILTER, BAND PASS )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES

Cross Reference | NSN 5915-00-482-7151
Part Number Cage Code Manufacturer
36183480045L-3 COMMUNICATIONS CINCINNATIELECTRONICS CORPORATION
Technical Data | NSN 5915-00-482-7151
Characteristic Specifications
REFERENCE FREQUENCY PER FUNCTIONZZ200.0 KILOHERTZ
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS6.0 BLANK
FREQUENCY BAND WIDTH PER FUNCTIONZZ179.00 KILOHERTZ AND ZZ220.00 KILOHERTZ
SOURCE IMPEDANCE RATING PER FUNCTIONZZ50.0 OHMS
LOAD IMPEDANCE PER FUNCTIONZZ50.0 OHMS
INPUT IMPEDANCE PER FUNCTION W/LOADZZ50.0 OHMS
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUTZZ50.0 OHMS
INCLOSURE TYPE ENCAPSULATED
STYLE DESIGNATOR RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
OVERALL LENGTH4.588 INCHES MINIMUM AND 4.597 INCHES MAXIMUM
OVERALL HEIGHT0.874 INCHES MINIMUM AND 0.884 INCHES MAXIMUM
BODY LENGTH4.000 INCHES NOMINAL
BODY WIDTH2.251 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
UNTHREADED MOUNTING HOLE DIAMETER0.140 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH4.176 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.437 INCHES NOMINAL
TEST DATA DOCUMENT80045-ES361834 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTIONZZ160.00 KILOHERTZ AND ZZ179.00 KILOHERTZ AND ZZ220.00 KILOHERTZ AND ZZ260.00 KILOHERTZ
DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELSZZ60.0 NOMINAL AND ZZ6.0 NOMINAL AND ZZ6.0 NOMINAL AND ZZ60.0 NOMINAL
PRINCIPAL CIRCUITRY TYPE PER FUNCTIONZZ INDUCTANCE-CAPACITANCE
INPUT TERMINAL MANUFACTURER CODE80045
INPUT TERMINAL IDENTIFICATION2112-06-4
OUTPUT TERMINAL MANUFACTURER CODE80045
OUTPUT TERMINAL IDENTIFICATION2112-06-4