Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-800-8199 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: RF9138, RF09138, 32213, C2069L, 5915-00-800-8199, 00-800-8199, 5915008008199, 008008199
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-800-8199 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-800-8199
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RF9138 | 13619 | EMS DEVELOPMENT CORPORATION |
| RF09138 | 13619 | EMS DEVELOPMENT CORPORATION |
| 32213 | 83326 | SAFE FLIGHT INSTRUMENT CORPORATION |
| C2069L | 13050 | SPECTRUM CONTROL, INC.DIV API TECHNOLOGIES - EIS/WESSON |
Technical Data | NSN 5915-00-800-8199
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | CZZ100.0 VOLTS |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 0.005 BLANK |
| INCLOSURE TYPE | ENCASED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| BODY LENGTH | 1.156 INCHES MAXIMUM |
| BODY HEIGHT | 0.844 INCHES MAXIMUM |
| BODY WIDTH | 1.031 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.140 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM |