Part Details | BAND PASS FILTER
5915-00-891-2356 An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).
Alternate Parts: 20811, 40B7, 5915-00-891-2356, 00-891-2356, 5915008912356, 008912356
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 20, 1967 | 00-891-2356 | 00209 ( FILTER, BAND PASS ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
Cross Reference | NSN 5915-00-891-2356
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 20811 | 14632 | DRS SIGNAL SOLUTIONS, INC. |
| 40B7 | 00136 | VECTRON INTERNATIONAL, INC. |
Technical Data | NSN 5915-00-891-2356
| Characteristic | Specifications |
|---|---|
| REFERENCE FREQUENCY PER FUNCTION | ZZ2.0 MEGAHERTZ |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 6.0 BLANK |
| FREQUENCY BAND WIDTH PER FUNCTION | ZZ1.9995 MEGAHERTZ AND ZZ2.0005 MEGAHERTZ |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | ZZ1.0 KILOHMS |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | ZZ1.0 KILOHMS |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| OVERALL HEIGHT | 1.320 INCHES MAXIMUM |
| BODY LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM |
| BODY HEIGHT | 1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM |
| BODY WIDTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED STUD |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| TEST DATA DOCUMENT | 14632-20811 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | ZZ1.998 MEGAHERTZ AND ZZ1.9995 MEGAHERTZ AND ZZ2.0005 MEGAHERTZ AND ZZ2.002 MEGAHERTZ |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | ZZ40.0 MINIMUM AND ZZ3.0 MAXIMUM AND ZZ3.0 MAXIMUM AND ZZ40.0 MINIMUM |