Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-912-9761 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: MW45P2, MW4-5P2, FA9001A, FA9001A, 5915-00-912-9761, 00-912-9761, 5915009129761, 009129761
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 29, 1966 | 00-912-9761 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-912-9761
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MW4-5P2 | 98437 | ELLIS & WATTS INTERNATIONAL, LLC |
| FA9001A | 13619 | EMS DEVELOPMENT CORPORATION |
| FA9001A | 81831 | FILTRON CO INCDIV OF RFI CORP |
Technical Data | NSN 5915-00-912-9761
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 400.0 BLANK |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 50.0 BLANK |
| MAXIMUM VOLTAGE DROP PER FUNCTION | CZZ750.0 MILLIVOLTS |
| INCLOSURE TYPE | ENCASED |
| STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 6.077 INCHES NOMINAL |
| BODY LENGTH | 4.125 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 2.469 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF |
| NOMINAL THREAD SIZE | 1.125 INCHES |
| TEST DATA DOCUMENT | 98437-MW4-SP2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| BODY MATERIAL | METAL |
| BODY SURFACE TREATMENT | TIN |