Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-925-6252 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: 5004TYPE146, 5-004TYPE146, 61A19D311, 5915-00-925-6252, 00-925-6252, 5915009256252, 009256252
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | FEB 04, 1966 | 00-925-6252 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-925-6252
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5-004TYPE146 | 0AM43 | LCR ELECTRONICS, INC. |
| 61A19D311 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 5915-00-925-6252
| Characteristic | Specifications |
|---|---|
| INCLOSURE TYPE | ENCASED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 8.563 INCHES MINIMUM AND 8.687 INCHES MAXIMUM |
| BODY LENGTH | 6.813 INCHES MINIMUM AND 6.937 INCHES MAXIMUM |
| BODY HEIGHT | 2.250 INCHES MINIMUM AND 2.374 INCHES MAXIMUM |
| BODY WIDTH | 2.038 INCHES MINIMUM AND 3.062 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.198 INCHES MINIMUM AND 0.207 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.313 INCHES MINIMUM AND 4.417 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 10001-61A19D311 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |