Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-979-3932 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: FA5190, FA5190, 7710175, 771017-5, 1988174PC5, 1B326, A867, A-867, 5915-00-979-3932, 00-979-3932, 5915009793932, 009793932
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1962 | 00-979-3932 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-979-3932
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FA5190 | 13619 | EMS DEVELOPMENT CORPORATION |
| FA5190 | 81831 | FILTRON CO INCDIV OF RFI CORP |
| 771017-5 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 1988174PC5 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
| 1B326 | 13058 | SORA POWER INC. |
| A-867 | 18621 | TRIPP RESEARCH CORP ELECTRONICS DIV |
Technical Data | NSN 5915-00-979-3932
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | BZZ120.0 VOLTS |
| POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 60.0 BLANK |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 0.5 BLANK |
| INCLOSURE TYPE | ENCASED |
| STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 4.159 INCHES MINIMUM AND 4.339 INCHES MAXIMUM |
| BODY LENGTH | 2.780 INCHES MINIMUM AND 2.906 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 0.939 INCHES MINIMUM AND 1.061 INCHES MAXIMUM |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.4375 INCHES |
| TEST DATA DOCUMENT | 10001-1988174P5 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | ZZ CAPACITANCE-INDUCTANCE |
| OPERATING TEMP RANGE | -55.0 TO +85.0 DEG CELSIUS |
| BODY MATERIAL | METAL |