Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-987-4525 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: SA9874525, SA9874-525, 690421, 1001413, 100-1413, 5915-00-987-4525, 00-987-4525, 5915009874525, 009874525
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 02, 1966 | 00-987-4525 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-987-4525
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SA9874-525 | 54991 | ASCHBACHER AND ASSOCIATES INC |
| 690421 | 80249 | BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION INC. |
| 100-1413 | 11872 | GULTON INDUSTRIES INC STANDARDELECTRONICS DIV |
Technical Data | NSN 5915-00-987-4525
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | BZZ125.0 VOLTS |
| POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 60.0 BLANK |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 25.0 BLANK |
| INCLOSURE TYPE | ENCASED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 4.562 INCHES NOMINAL |
| OVERALL HEIGHT | 1.562 INCHES NOMINAL |
| OVERALL WIDTH | 7.250 INCHES NOMINAL |
| BODY LENGTH | 3.562 INCHES NOMINAL |
| BODY HEIGHT | 3.562 INCHES MINIMUM |
| BODY WIDTH | 6.000 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.193 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.000 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 4.500 INCHES NOMINAL |
| TEST DATA DOCUMENT | 80249-690421 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| BODY MATERIAL | METAL |