Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-991-1486 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: FA1809B, FA1809B, 7711126PT10 REV.S, 771112610, 7711126-10, JN17239A, JN17-239A, 5915-00-991-1486, 00-991-1486, 5915009911486, 009911486
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAR 23, 1967 | 00-991-1486 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-991-1486
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FA1809B | 13619 | EMS DEVELOPMENT CORPORATION |
| FA1809B | 81831 | FILTRON CO INCDIV OF RFI CORP |
| 7711126PT10 REV.S | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
| 7711126-10 | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
| JN17-239A | 56289 | SPRAGUE ELECTRIC COWORLD HQS |
Technical Data | NSN 5915-00-991-1486
| Characteristic | Specifications |
|---|---|
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | BZZ250.0 VOLTS AND CZZ600.0 VOLTS |
| POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 60.0 BLANK |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 50.0 BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | M2 TAB W/SCREW |
| STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 6.769 INCHES MAXIMUM |
| BODY LENGTH | 4.407 INCHES MINIMUM AND 4.593 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 2.188 INCHES MINIMUM AND 2.312 INCHES MAXIMUM |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.205 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.750 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF |
| NOMINAL THREAD SIZE | 1.125 INCHES |
| TEST DATA DOCUMENT | 03538-771126 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | ZZ INDUCTANCE-CAPACITANCE |
| MAXIMUM TEMP RISE | 25.0 DEG CELSIUS |
| OPERATING TEMP RANGE | -55.0 TO +125.0 DEG CELSIUS |