Part Details | BAND PASS FILTER
5915-01-076-9941 An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).
Alternate Parts: 700FK109, SMA935150, SM-A-935150, 5915-01-076-9941, 01-076-9941, 5915010769941, 010769941
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 16, 1979 | 01-076-9941 | 00209 ( FILTER, BAND PASS ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
Cross Reference | NSN 5915-01-076-9941
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 700FK109 | 01456 | MICROWAVE DEVELOPMENT LABORATORIES,INC. |
| SM-A-935150 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 5915-01-076-9941
| Characteristic | Specifications |
|---|---|
| REFERENCE FREQUENCY PER FUNCTION | ZZ130.0 MEGAHERTZ |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 1.0 BLANK |
| FREQUENCY BAND WIDTH PER FUNCTION | ZZ520.00 MEGAHERTZ AND ZZ820.00 MEGAHERTZ |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | ZZ50.0 OHMS |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | ZZ50.0 OHMS |
| VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION | ZZ130.0 MEGAHERTZ |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | Q2 CONNECTOR, RECEPTACLE |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| BODY LENGTH | 5.480 INCHES MINIMUM AND 5.520 INCHES MAXIMUM |
| BODY HEIGHT | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| BODY WIDTH | 4.750 INCHES MINIMUM AND 4.790 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 5.195 INCHES MINIMUM AND 5.205 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 4.465 INCHES MINIMUM AND 4.475 INCHES MAXIMUM |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | ZZ520.00 MEGAHERTZ AND ZZ820.00 MEGAHERTZ AND ZZ1.90 GIGAHERTZ |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | ZZ20.0 NOMINAL |