Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-01-133-5911 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: 8219007501, 8219-0075-01, FC2594, F12922, F13142, F-13142, M1792, 10135206, 5915-01-133-5911, 01-133-5911, 5915011335911, 011335911
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 16, 1982 | 01-133-5911 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
Cross Reference | NSN 5915-01-133-5911
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8219-0075-01 | 17472 | EATON CORPORATIONDIV FUEL & MOTION CONTROL SYSTEMS |
| FC2594 | 56528 | FIL-COIL (FC) INC. |
| F12922 | 0AM43 | LCR ELECTRONICS, INC. |
| F-13142 | 0AM43 | LCR ELECTRONICS, INC. |
| M1792 | 59901 | MTK ELECTRONICS, INC. |
| 10135206 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 5915-01-133-5911
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | CZZ28.0 VOLTS |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 23.0 BLANK |
| INCLOSURE TYPE | ENCASED |
| STYLE DESIGNATOR | 0 RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| BODY LENGTH | 3.350 INCHES MAXIMUM |
| BODY HEIGHT | 1.562 INCHES MAXIMUM |
| BODY WIDTH | 2.350 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.174 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.958 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.958 INCHES MAXIMUM |
| BODY MATERIAL | METAL |
| BODY SURFACE TREATMENT | TIN |