Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-01-136-2353 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: RF3217, RF03217, A5102, A-5102, 7758020001, 7758020-001, 5915-01-136-2353, 01-136-2353, 5915011362353, 011362353
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 05, 1982 | 01-136-2353 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-01-136-2353
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RF3217 | 13619 | EMS DEVELOPMENT CORPORATION |
| RF03217 | 13619 | EMS DEVELOPMENT CORPORATION |
| A-5102 | 59901 | MTK ELECTRONICS, INC. |
| 7758020-001 | 98747 | OGDEN AIR LOGISTICS CENTER |
Technical Data | NSN 5915-01-136-2353
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | BZZ250.0 VOLTS AND CZZ600.0 VOLTS |
| POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 60.0 BLANK |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 200.0 BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 8.000 INCHES NOMINAL |
| BODY LENGTH | 5.250 INCHES NOMINAL |
| BODY HEIGHT | 2.750 INCHES NOMINAL |
| BODY WIDTH | 3.750 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 5.750 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.687 INCHES NOMINAL |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | ZZ CAPACITANCE-INDUCTANCE |
| BODY MATERIAL | METAL |