Part Details | THERMOSTATIC SWITCH
5930-01-031-1514 A switch that is actuated by changes in ambient temperature. Excludes CIRCUIT BREAKER; CONTROL, TEMPERATURE (as modified); FUSE (as modified); PROTECTOR, THERMAL-OVERLOAD, ELECTRICAL MOTOR; RELAY, THERMAL; and THERMOSTAT, FLOW CONTROL. See also CONTROL, TEMPERATURE (as modified) and REGULATOR, TEMPERATURE (as modified).
Alternate Parts: L507002635, 22623445, 2262344-5, 5930-01-031-1514, 01-031-1514, 5930010311514, 010311514
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 20, 1976 | 01-031-1514 | 00451 ( SWITCH, THERMOSTATIC ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR
Cross Reference | NSN 5930-01-031-1514
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| L507002635 | 36090 | LOCKHEED MARTIN LIBRASCOPECORP |
| 2262344-5 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 5930-01-031-1514
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | RECTANGULAR |
| OVERALL LENGTH | 1.250 INCHES NOMINAL |
| OVERALL HEIGHT | 0.440 INCHES MAXIMUM |
| OVERALL WIDTH | 0.400 INCHES NOMINAL |
| BODY LENGTH | 0.776 INCHES NOMINAL |
| BODY WIDTH | 0.400 INCHES NOMINAL |
| BODY HEIGHT | 0.250 INCHES NOMINAL |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT ADJUSTABLE, PRESET AND ACTUATION POINT ADJUSTABLE, PRESET |
| CONTACT ADJUSTMENT RANGE | -26.00 TO +96.00 ACTUATION POINT DEGREES CELSIUS AND +43.00 TO +49.00 DEACTUATION POINT DEGREES CELSIUS |
| CONTACT ADJUSTMENT TYPE | EXTERNAL DEACTUATION POINT SHAFT AND EXTERNAL ACTUATION POINT SHAFT |
| CONTACT STIMULUS RATING | AE46.00 ACTUATION POINT NOMINAL AND AE3.00 DIFFERENTIAL POINT NOMINAL |
| OPERATING TEMP RATING | 85.0 DEG CELSIUS MAXIMUM AND -65.0 DEG CELSIUS MINIMUM |
| MEDIA FOR WHICH DESIGNED | Q$DADF |
| TEMP SENSING ELEMENT TYPE | INTERNAL SENSOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| MOUNTING METHOD | UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.000 INCHES NOMINAL |