Part Details | RECEPTACLE DUMMY CONNECTOR
5935-00-532-1708 An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
Alternate Parts: MILC26482, MIL-C-26482, MS311524, MS3115-24, MS311524W, MS3115-24W, MS311524L, MS3115-24L, MS311524A, MS3115-24A, 10135485, 5935-00-532-1708, 00-532-1708, 5935005321708, 005321708
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 18, 1969 | 00-532-1708 | 15092 ( DUMMY CONNECTOR, RECEPTACLE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5935-00-532-1708
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-C-26482 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MS3115-24 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS3115-24W | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS3115-24L | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS3115-24A | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| 10135485 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 5935-00-532-1708
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 0.683 INCHES NOMINAL |
| OVERALL HEIGHT | 1.703 INCHES MAXIMUM |
| OVERALL WIDTH | 1.703 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.375 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.375 INCHES NOMINAL |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.589 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.142 INCHES MINIMUM AND 0.152 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| MATING END QUANTITY | 1 |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| TEST DATA DOCUMENT | 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 96906-MS3115 GOVERNMENT STANDARD |