Part Details | RECEPTACLE DUMMY CONNECTOR
5935-00-975-6984 An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
Alternate Parts: MILC26500, MIL-C-26500, MS272976, MS27297-6, 5935-00-975-6984, 00-975-6984, 5935009756984, 009756984
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | OCT 05, 1966 | 00-975-6984 | 15092 ( DUMMY CONNECTOR, RECEPTACLE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5935-00-975-6984
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-C-26500 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MS27297-6 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
Technical Data | NSN 5935-00-975-6984
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM |
| OVERALL WIDTH | 1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE AND QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL SURFACE TREATMENT | ANODIZE |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| MATING END QUANTITY | 1 |