Part Details | RECEPTACLE DUMMY CONNECTOR
5935-01-117-3032 An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
Alternate Parts: 110700121, 1107-001-21, 10427405219, 10-427405-219, ST5M140221, ST5M1402-21, LE48200373021, LE482-0037-3021, DRP07A21S, 650FS001NF21, G847221N, G8472-21-N, M38999921B, M38999/9-21B, MILDTL389999, MIL-DTL-38999/9, MILDTL38999, MIL-DTL-38999, MILC38999, MIL-C-38999, 123118821, 12311882-1, 5935-01-117-3032, 01-117-3032, 5935011173032, 011173032
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 13, 1981 | 01-117-3032 | 15092 ( DUMMY CONNECTOR, RECEPTACLE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5935-01-117-3032
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1107-001-21 | 59976 | AERO-ELECTRIC CONNECTOR, INC.DIV AERO ELECTRIC CONNECTOR |
| 10-427405-219 | 77820 | AMPHENOL CORPORATIONDBA AMPHENOL AEROSPACE OPERATIONS |
| ST5M1402-21 | 76301 | BOEING COMPANY, THEDBA BOEING |
| LE482-0037-3021 | 43999 | BOEING COMPANY, THEDBA BOEING |
| DRP07A21S | 24805 | ESC TECHNOLOGIES INC |
| 650FS001NF21 | 06324 | GLENAIR, INC. |
| G8472-21-N | 06324 | GLENAIR, INC. |
| M38999/9-21B | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-DTL-38999/9 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-DTL-38999 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-C-38999 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 12311882-1 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5935-01-117-3032
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 0.802 INCHES MINIMUM AND 0.837 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.688 INCHES NOMINAL |
| OVERALL WIDTH | 1.688 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.375 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.375 INCHES NOMINAL |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.697 INCHES NOMINAL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| MATING END QUANTITY | 1 |
| ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT |
| TEST DATA DOCUMENT | 81349-MIL-DTL-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-38999 TO 9 GOVERNMENT SPECIFICATION |