Part Details | QUARTZ CRYSTAL UNIT
5955-01-393-8817 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
Alternate Parts: 110540001, 110540-001, 110540001, 110540-001, CX1VS03 32.768KHZ PORM10PPMM, CX1VS-03 32.768KHZ PORM10PPM/M, 5955-01-393-8817, 01-393-8817, 5955013938817, 013938817
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 29, 1994 | 01-393-8817 | 00196 ( CRYSTAL UNIT, QUARTZ ) |
REFERENCE DRAWINGS & PICTURES
OVAL BODY, WIRE LEADS
Cross Reference | NSN 5955-01-393-8817
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 110540-001 | 35012 | GE AVIATION SYSTEMS LLCDBA GE AVIATION |
| 110540-001 | 058R3 | GE AVIATION SYSTEMS LLCDIV CUSTOMER SERVICES |
| CX1VS-03 32.768KHZ PORM10PPM/M | 51791 | STATEK CORPORATION |
Technical Data | NSN 5955-01-393-8817
| Characteristic | Specifications |
|---|---|
| MODE OF OSCILLATION | FUNDAMENTAL |
| CIRCUIT RESONANCE | ANTIRESONANCE |
| LOAD CAPACITANCE IN PICOFARADS | 9.0 NOMINAL |
| SHUNT CAPACITANCE IN PICOFARADS | 1.4 NOMINAL |
| SPECIFIED FREQUENCY | 32.768 KILOHERTZ |
| FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | M0.003/P0.003 |
| OPERATING TEMP RANGE | -55.0 TO +125.0 DEG CELSIUS |
| EQUIVALENT RESISTANCE VALUE IN OHMS | 22000.0 NOMINAL |
| DRIVE LEVEL RATING | 1.0 MICROWATTS MAXIMUM |
| STYLE DESIGNATOR | 8 OVAL BODY, WIRE LEADS |
| OVERALL LENGTH | 0.320 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.165 INCHES MAXIMUM |
| OVERALL WIDTH | 0.330 INCHES MAXIMUM |
| BODY LENGTH | 0.155 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.800 INCHES MAXIMUM |
| TERMINAL WIDTH | 0.018 INCHES NOMINAL |
| TERMINAL THICKNESS | 0.010 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| HOLDER COVER MATERIAL | CERAMIC |
| TEST DATA DOCUMENT | 35012-110540 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIFICATION/STANDARD DATA | 35012-110540-001 MANUFACTURERS SOURCE CONTROL |
| END ITEM IDENTIFICATION | 10-112-30, CAGE 35012 |