Part Details | DIGITAL MICROCIRCUIT
5962-00-459-4440 A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or "1" and "0".
Alternate Parts: 71000291, 7100029-1, C4300W, C4300J, 5962-00-459-4440, 00-459-4440, 5962004594440, 004594440
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | FEB 27, 1972 | 00-459-4440 | 31779 ( MICROCIRCUIT, DIGITAL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5962-00-459-4440
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7100029-1 | 10236 | ELECTRODYNAMICS, INC.DBA L-3 COMMUNICATIONS |
| C4300W | 18324 | PHILIPS SEMICONDUCTORS INC |
| C4300J | 18324 | PHILIPS SEMICONDUCTORS INC |
Technical Data | NSN 5962-00-459-4440
| Characteristic | Specifications |
|---|---|
| OUTPUT LOGIC FORM | RESISTOR-TRANSISTOR LOGIC |
| DESIGN FUNCTION AND QUANTITY | 2 GATE, NAND |
| INPUT CIRCUIT PATTERN | DUAL 4 INPUT |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | ACV6.0 VOLTS MAXIMUM |
| TIME RATING PER CHACTERISTIC | AEE13.00 NANOSECONDS MAXIMUM AND AED13.00 NANOSECONDS MAXIMUM |
| OPERATING TEMP RANGE | +0.0 TO +75.0 DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 14 FLAT LEADS |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INCLOSURE CONFIGURATION | FLAT PACK |
| INCLOSURE MATERIAL | GLASS AND METAL |
| CASE OUTLINE SOURCE AND DESIGNATOR | T0-88 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| BODY LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| BODY HEIGHT | 0.030 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| BODY WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MAXIMUM POWER DISSIPATION RATING | 62.0 MILLIWATTS |
| STORAGE TEMP RANGE | -65.0 TO +150.0 DEG CELSIUS |
| FEATURES PROVIDED | MONOLITHIC AND HERMETICALLY SEALED AND POSITIVE OUTPUTS AND HIGH SPEED AND W/TOTEM POLE OUTPUT AND DARLINGTON-CONNECTED |
| TEST DATA DOCUMENT | 10236-7100029 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |