Part Details | LINEAR MICROCIRCUIT
5962-01-081-3923 A microcircuit whose output is a function of the input; that is, the output varies in a predetermined and essentially predictable manner from the input signal.
Alternate Parts: DMS 87013, DMS 87-013, 7702812XX, 7702812XC, 7702812XB, 7702812XA, 77028, LM103H5.1, LM103H-5.1, 5962-01-081-3923, 01-081-3923, 5962010813923, 010813923
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 12, 1979 | 01-081-3923 | 31778 ( MICROCIRCUIT, LINEAR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5962-01-081-3923
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| DMS 87-013 | 16236 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 7702812XX | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 7702812XC | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 7702812XB | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 7702812XA | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 77028 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| LM103H-5.1 | 27014 | NATIONAL SEMICONDUCTOR CORPORATION |
Technical Data | NSN 5962-01-081-3923
| Characteristic | Specifications |
|---|---|
| DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, VOLTAGE |
| INPUT CIRCUIT PATTERN | 1 INPUT |
| OPERATING TEMP RANGE | -55.0 TO +125.0 DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 2 PIN |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INCLOSURE CONFIGURATION | CAN |
| INCLOSURE MATERIAL | GLASS AND METAL |
| CASE OUTLINE SOURCE AND DESIGNATOR | T0-46 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| BODY OUTSIDE DIAMETER | 0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| BODY HEIGHT | 0.065 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| MAXIMUM POWER DISSIPATION RATING | 250.0 MILLIWATTS |
| STORAGE TEMP RANGE | -65.0 TO +150.0 DEG CELSIUS |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS |
| TEST DATA DOCUMENT | 14933-77028 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |