Part Details | LINEAR MICROCIRCUIT
5962-01-099-6193 A microcircuit whose output is a function of the input; that is, the output varies in a predetermined and essentially predictable manner from the input signal.
Alternate Parts: 7704003XB, 7704003XB, UA79M12HM, 7704003XB, LM120H12, LM120H-12, 10136021, 5962-01-099-6193, 01-099-6193, 5962010996193, 010996193
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 21, 1980 | 01-099-6193 | 31778 ( MICROCIRCUIT, LINEAR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5962-01-099-6193
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7704003XB | 16236 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 7704003XB | 07263 | FAIRCHILD SEMICONDUCTOR CORP |
| UA79M12HM | 07263 | FAIRCHILD SEMICONDUCTOR CORP |
| 7704003XB | 27014 | NATIONAL SEMICONDUCTOR CORPORATION |
| LM120H-12 | 27014 | NATIONAL SEMICONDUCTOR CORPORATION |
| 10136021 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 5962-01-099-6193
| Characteristic | Specifications |
|---|---|
| DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, VOLTAGE |
| INPUT CIRCUIT PATTERN | 1 INPUT |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | ACV35.0 VOLTS MAXIMUM |
| CURRENT RATING PER CHARACTERISTIC | GX2.00 AMPERES NOMINAL |
| OPERATING TEMP RANGE | -55.0 TO +125.0 DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INCLOSURE CONFIGURATION | CAN |
| INCLOSURE MATERIAL | METAL |
| CASE OUTLINE SOURCE AND DESIGNATOR | T0-5 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| BODY LENGTH | 0.185 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MAXIMUM POWER DISSIPATION RATING | 2.0 WATTS |
| STORAGE TEMP RANGE | -65.0 TO +150.0 DEG CELSIUS |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| TEST DATA DOCUMENT | 14933-77040 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |