Part Details | LINEAR MICROCIRCUIT
5962-01-103-6337 A microcircuit whose output is a function of the input; that is, the output varies in a predetermined and essentially predictable manner from the input signal.
Alternate Parts: 7702803XX, 7702803XC, 7702803XB, 7702803XA, 77028, LM103H2.2, LM103H-2.2, 130587351, 13058735-1, 5962-01-103-6337, 01-103-6337, 5962011036337, 011036337
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 16, 1980 | 01-103-6337 | 31778 ( MICROCIRCUIT, LINEAR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5962-01-103-6337
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7702803XX | 67268 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 7702803XC | 67268 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 7702803XB | 67268 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 7702803XA | 67268 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 77028 | 67268 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| LM103H-2.2 | 27014 | NATIONAL SEMICONDUCTOR CORPORATION |
| 13058735-1 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 5962-01-103-6337
| Characteristic | Specifications |
|---|---|
| DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, VOLTAGE |
| INPUT CIRCUIT PATTERN | 1 INPUT |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | ACV2.2 VOLTS MAXIMUM |
| OPERATING TEMP RANGE | -55.0 TO +125.0 DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 2 PIN |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INCLOSURE CONFIGURATION | CAN |
| INCLOSURE MATERIAL | METAL |
| BODY OUTSIDE DIAMETER | 0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| BODY HEIGHT | 0.090 INCHES NOMINAL |
| MAXIMUM POWER DISSIPATION RATING | 250.0 MILLIWATTS |
| STORAGE TEMP RANGE | -65.0 TO +150.0 DEG CELSIUS |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| SPECIAL FEATURES | PIN 2 CONNECTED TO CASE |
| TEST DATA DOCUMENT | 14933-77028 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |