Part Details | VARIABLE ATTENUATOR
5985-00-272-7451 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: 4135SPECIAL, LA251G, 5985-00-272-7451, 00-272-7451, 5985002727451, 002727451
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-272-7451 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL W/REAR TERMINALS
BALANCED LADDER
Cross Reference | NSN 5985-00-272-7451
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4135SPECIAL | 58880 | MEGGITT (NEW HAMPSHIRE), INC |
| LA251G | 28057 | SHALLCO, INC. |
Technical Data | NSN 5985-00-272-7451
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | AUDIO |
| SCHEMATIC DIAGRAM DESIGNATOR | BALANCED LADDER |
| IMPEDANCE RATING IN OHMS | 600.0 OUTPUT |
| VOLTAGE STANDING WAVE RATIO | 600.00 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P30.0 |
| ATTENUATION VARIATION METHOD | STEPPED |
| STEP POSITION QUANTITY | 10 |
| ATTENUATION PER STEP IN DECIBELS | 3.0 |
| BODY STYLE | CYLINDRICAL W/REAR TERMINALS |
| OVERALL LENGTH | 2.688 INCHES MAXIMUM |
| BODY DIAMETER | 2.125 INCHES NOMINAL |
| BODY LENGTH | 2.063 INCHES NOMINAL |
| OVERALL DIAMETER | 2.250 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| SHAFT TYPE | ROUND |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.938 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.500 INCHES NOMINAL |