Part Details | VARIABLE ATTENUATOR
5985-00-437-6443 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: 355CM502, 355C-M-502, HP355C, C03355C, C03-355C, 355C0PTI0N03, 355COPTH80, 355C003, 355C-003, 355C, CN970U, 467A, HP355C, 355C003, 355C-003, TS5087, CV1000004001N, CV100-0004-001N, 990C799H01, AT200SR, 5325041, 532504-1, 5985-00-437-6443, 00-437-6443, 5985004376443, 004376443
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | SEP 05, 1969 | 00-437-6443 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
COAXIAL TYPE
Cross Reference | NSN 5985-00-437-6443
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 355C-M-502 | 50436 | HEWLETT-PACKARD CO VIDEOCOMMUNICATION DIV |
| HP355C | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| C03-355C | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 355C0PTI0N03 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 355COPTH80 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 355C-003 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 355C | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| CN970U | 80058 | JOINT ELECTRONICS TYPE DESIGNATIONSYSTEM |
| 467A | 80138 | KAY ELEMETRICS CORPORATION |
| HP355C | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. |
| 355C-003 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. |
| TS5087 | H0G30 | KONINKLYKE LANDMACHTDMPRODUCTGROEPCOMMANDOVOERINGS-, |
| CV100-0004-001N | U0153 | MARCONI SPACE SYSTEMS LTD |
| 990C799H01 | 18323 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDBA ELECTRONIC SYSTEMS |
| AT200SR | 12598 | R L C ELECTRONICS, INC. |
| 532504-1 | 96214 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 5985-00-437-6443
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| FREQUENCY RANGE | 0.000 GIGAHERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| POWER RATING | 500.0 MILLIWATTS AVERAGE |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P12.0 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | M0.35/P0.35 |
| ATTENUATION VARIATION METHOD | STEPPED |
| STEP POSITION QUANTITY | 12 |
| ATTENUATION PER STEP IN DECIBELS | 1.0 |
| BODY STYLE | COAXIAL TYPE |
| OVERALL LENGTH | 6.000 INCHES NOMINAL |
| OVERALL HEIGHT | 3.750 INCHES NOMINAL |
| OVERALL WIDTH | 2.000 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
| COAXIAL CONNECTOR SERIES DESIGNATION | BNC |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.138 INCHES |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.500 INCHES NOMINAL |
| TEST DATA DOCUMENT | 18323-990799H01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| OPERATING TEMP RANGE | +40.0 TO +115.0 DEG CELSIUS |