Part Details | VARIABLE ATTENUATOR
5985-00-477-1208 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: 87683162, 8768316-2, JJJCS91191, 5985-00-477-1208, 00-477-1208, 5985004771208, 004771208
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 18, 1971 | 00-477-1208 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL W/SIDE TERMINALS
BRIDGED "T"
Cross Reference | NSN 5985-00-477-1208
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8768316-2 | 49675 | RCA CORP GOVERNMENT AND COMMERCIALSYSTEMS COMMERCIAL COMMICATIONS |
| JJJCS91191 | 01121 | ROCKWELL AUTOMATION, INC. |
Technical Data | NSN 5985-00-477-1208
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | AUDIO |
| SCHEMATIC DIAGRAM DESIGNATOR | BRIDGED "T" |
| FREQUENCY RANGE | 0.000 GIGAHERTZ MINIMUM AND 4.500 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 1000.0 INPUT AND 150.0 OUTPUT |
| POWER RATING | 5.0 WATTS AVERAGE |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.228 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P34.0/P43.0 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | M1.00/P1.00 |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | CYLINDRICAL W/SIDE TERMINALS |
| OVERALL LENGTH | 3.401 INCHES MAXIMUM |
| OVERALL WIDTH | 1.453 INCHES MAXIMUM |
| BODY DIAMETER | 1.156 INCHES MAXIMUM |
| BUSHING LENGTH | 0.375 INCHES NOMINAL |
| BODY LENGTH | 2.125 INCHES MAXIMUM |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 2 SHAFT |
| SHAFT TYPE | ROUND, SLOTTED |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT LENGTH | 1.120 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 11 TAB, SOLDER LUG |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.375 INCHES |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| SPECIAL FEATURES | DUAL CONCENTRIC SHAFT AND SPST ROTARY SWITCH |
| TEST DATA DOCUMENT | 49675-8768316 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SCALE LINEARITY | LINEAR |
| OPERATING TEMP RANGE | -55.0 TO +120.0 DEG CELSIUS |