Part Details | VARIABLE ATTENUATOR
5985-00-517-8853 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: M242159002, M24215/9-002, MILA24215, MIL-A-24215, 5985-00-517-8853, 00-517-8853, 5985005178853, 005178853
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 11, 1974 | 00-517-8853 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
COAXIAL TYPE
Cross Reference | NSN 5985-00-517-8853
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M24215/9-002 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-A-24215 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5985-00-517-8853
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| FREQUENCY RANGE | 2.000 GIGAHERTZ MINIMUM AND 8.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| VOLTAGE STANDING WAVE RATIO | 1.50 |
| POWER RATING | 2.0 WATTS AVERAGE |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.5 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P20.0 |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | COAXIAL TYPE |
| OVERALL LENGTH | 2.510 INCHES NOMINAL |
| OVERALL HEIGHT | 1.720 INCHES NOMINAL |
| OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.090 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.656 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.844 INCHES NOMINAL |
| TEST DATA DOCUMENT | 81349-MIL--24215 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-A-24215 TO 9 GOVERNMENT SPECIFICATION |
| OPERATING TEMP RANGE | -30.0 TO +110.0 DEG CELSIUS |