Part Details | VARIABLE ATTENUATOR
5985-00-597-2464 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: AR3221, 20273002, 2027-3002, 20273002, 2027-3002, 5985-00-597-2464, 00-597-2464, 5985005972464, 005972464
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 11, 1975 | 00-597-2464 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
COAXIAL TYPE
Cross Reference | NSN 5985-00-597-2464
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AR3221 | 09992 | ARRA INC |
| 2027-3002 | 06351 | MICROWAVE ENGINEERING CORPORATION |
| 2027-3002 | 99380 | SIERRA NETWORKS INCSIERRACOM DIV |
Technical Data | NSN 5985-00-597-2464
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| FREQUENCY RANGE | 925.000 MEGAHERTZ MINIMUM AND 1.225 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| VOLTAGE STANDING WAVE RATIO | 1.50 |
| POWER RATING | 50.0 WATTS AVERAGE AND 8.0 KILOWATTS PEAK |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.5 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P40.0 |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | COAXIAL TYPE |
| OVERALL LENGTH | 6.937 INCHES NOMINAL |
| OVERALL HEIGHT | 6.035 INCHES NOMINAL |
| OVERALL WIDTH | 1.250 INCHES MAXIMUM |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| SHAFT TYPE | ROUND, FLATTED |
| FIRST FLAT LENGTH | 0.219 INCHES NOMINAL |
| FLAT HEIGHT | 0.200 INCHES NOMINAL |
| SHAFT DIAMETER | 0.249 INCHES MAXIMUM |
| SHAFT LENGTH | 1.410 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, MALE |
| COAXIAL CONNECTOR SERIES DESIGNATION | N |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| MOUNTING THREAD QUANTITY | 40 PER INCH |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.625 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.625 INCHES NOMINAL |
| SPECIAL FEATURES | ATTENUATION VARIED BY PUSH-PULL SHAFT MOTION |
| OPERATING TEMP RANGE | +0.0 TO +55.0 DEG CELSIUS |