Part Details | VARIABLE ATTENUATOR
5985-00-665-4910 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: D51746, D851746, D51746, 5985-00-665-4910, 00-665-4910, 5985006654910, 006654910
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-665-4910 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
COAXIAL TYPE
Cross Reference | NSN 5985-00-665-4910
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| D51746 | 96955 | AMERAC INC |
| D851746 | 98738 | HERLEY CHICAGODBA STEWART WARNER ELECTRONICS |
| D51746 | 00798 | MUTRON CORP |
Technical Data | NSN 5985-00-665-4910
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | WAVEGUIDE |
| FREQUENCY RANGE | 95.000 MEGAHERTZ MINIMUM AND 1.225 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 51.0 INPUT-OUTPUT |
| VOLTAGE STANDING WAVE RATIO | 1.25 |
| POWER RATING | 500.0 MILLIWATTS PEAK |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.2 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P27.0/P127.0 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | M2.50/P2.50 |
| ATTENUATION ACCURACY REFERENCE FREQUENCY | 3.2 GIGAHERTZ |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | COAXIAL TYPE |
| OVERALL LENGTH | 12.000 INCHES NOMINAL |
| OVERALL HEIGHT | 2.250 INCHES NOMINAL |
| OVERALL WIDTH | 4.219 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| COAXIAL CONNECTOR SERIES DESIGNATION | BNC |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.000 INCHES NOMINAL |
| SCALE LINEARITY | LINEAR |
| OPERATING TEMP RANGE | -40.0 TO +85.0 DEG CELSIUS |
| BODY MATERIAL | BRASS |
| FSC APPLICATION DATA | TEST SET EXCEPT SPECIALLY DESIGNED |