Part Details | VARIABLE ATTENUATOR
5985-00-678-5297 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: SMC336287, SMC336287, 5985-00-678-5297, 00-678-5297, 5985006785297, 006785297
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-678-5297 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL W/SIDE TERMINALS
BRIDGED "T"
Cross Reference | NSN 5985-00-678-5297
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SMC336287 | 58880 | MEGGITT (NEW HAMPSHIRE), INC |
| SMC336287 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 5985-00-678-5297
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | AUDIO |
| SCHEMATIC DIAGRAM DESIGNATOR | BRIDGED "T" |
| IMPEDANCE RATING IN OHMS | 600.0 INPUT-OUTPUT |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P10.0 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | M5.00/P5.00 |
| ATTENUATION VARIATION METHOD | STEPPED |
| STEP POSITION QUANTITY | 20 |
| ATTENUATION PER STEP IN DECIBELS | 0.5 |
| BODY STYLE | CYLINDRICAL W/SIDE TERMINALS |
| OVERALL LENGTH | 2.750 INCHES NOMINAL |
| OVERALL WIDTH | 2.703 INCHES NOMINAL |
| BODY DIAMETER | 2.344 INCHES NOMINAL |
| BODY LENGTH | 2.062 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| SHAFT TYPE | ROUND, FLATTED |
| FIRST FLAT LENGTH | 0.500 INCHES NOMINAL |
| FLAT HEIGHT | 0.205 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.688 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 2 PIN |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.500 INCHES NOMINAL |