Part Details | FIXED ATTENUATOR
5985-01-060-4559 A device for reducing the strength of an alternating current signal by a fixed or predetermined amount, without causing appreciable signal distortion, by maintaining correct impedance match.
Alternate Parts: A608M, 2946002, 294-6-002, ATT02940600202, ATT-0294-06-002-02, 50HF006SMA, 50HF-006-SMA, 3790541021, 379-0541-021, FP186, FP18/6, 5985-01-060-4559, 01-060-4559, 5985010604559, 010604559
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 23, 1978 | 01-060-4559 | 14224 ( ATTENUATOR, FIXED ) |
REFERENCE DRAWINGS & PICTURES
ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
Cross Reference | NSN 5985-01-060-4559
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A608M | 64537 | AEROFLEX CONTROL COMPONENTS, INC.DIV AEROFLEX CONTROL COMPONENTS |
| 294-6-002 | 34078 | CINCH CONNECTIVITY SOLUTIONS, INC. |
| ATT-0294-06-002-02 | 34078 | CINCH CONNECTIVITY SOLUTIONS, INC. |
| 50HF-006-SMA | 61162 | JFW INDUSTRIES INCORPORATED |
| 379-0541-021 | 13499 | ROCKWELL COLLINS, INC.DBA GOVERNMENT SYSTEMS |
| FP18/6 | 23042 | TRILITHIC, INC. |
Technical Data | NSN 5985-01-060-4559
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| INPUT IMPEDANCE RATING IN OHMS | 50.0 |
| OUTPUT IMPEDANCE RATING IN OHMS | 50.0 |
| FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 2.000 GIGAHERTZ MAXIMUM |
| VOLTAGE STANDING WAVE RATIO | 1.20 |
| RF SIGNAL ATTENUATION IN DECIBELS | 6.0 |
| ATTENUATION ACCURACY IN DECIBELS | M0.30/P0.30 |
| POWER RATING | 2.0 WATTS AVERAGE AND 500.0 WATTS PEAK |
| OPERATING TEMP RANGE | -54.0 TO +125.0 DEG CELSIUS |
| BODY STYLE | ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE |
| OVERALL LENGTH | 0.860 INCHES NOMINAL |
| OVERALL DIAMETER | 0.312 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| MOUNTING METHOD | CONNECTOR |
| TEST DATA DOCUMENT | 13499-379-0541 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |