Part Details | VARIABLE ATTENUATOR
5985-01-145-8694 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: 4002277501, 40-022775-01, AUM25A42633, AUM-25A/42633, 5985-01-145-8694, 01-145-8694, 5985011458694, 011458694
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 20, 1983 | 01-145-8694 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
IRREGULAR
Cross Reference | NSN 5985-01-145-8694
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 40-022775-01 | 30890 | INTERLINK COMMUNICATIONS INC |
| AUM-25A/42633 | 12457 | MERRIMAC INDUSTRIES, INC. |
Technical Data | NSN 5985-01-145-8694
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| FREQUENCY RANGE | 0.500 GIGAHERTZ MINIMUM AND 8.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| VOLTAGE STANDING WAVE RATIO | 1.50 |
| POWER RATING | 2.0 WATTS AVERAGE |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.5 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P40.0 |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | IRREGULAR |
| OVERALL LENGTH | 3.470 INCHES MINIMUM AND 3.530 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| OVERALL WIDTH | 1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.083 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |