Part Details | DELAY LINE
5999-00-011-4997 An item which provides a predetermined delay to an electrical pulse, while maintaining substantially the same waveform. The delay is obtained by means of a real or artificial transmission line or equivalent device. The equivalent device may be acoustic, distributive, lumped constant, magnetic solid state, or surface acoustical wave type. See also ATTENUATOR, (as modified); TRANSFORMER, (as modified); and OSCILLATOR, PULSE DELAY.
Alternate Parts: 292014P1, J7965, DL30A, 5999-00-011-4997, 00-011-4997, 5999000114997, 000114997
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 15, 1967 | 00-011-4997 | 06373 ( DELAY LINE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR
2 POSITION IN-LINE
Cross Reference | NSN 5999-00-011-4997
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 292014P1 | 94117 | BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION INC. |
| J7965 | 72259 | NYTRONICS INC |
| DL30A | 72259 | NYTRONICS INC |
Technical Data | NSN 5999-00-011-4997
| Characteristic | Specifications |
|---|---|
| SIGNAL DELAY METHOD | LUMPED CONSTANT |
| DELAY TIME VARIATION METHOD | VARIABLE |
| INDIVIDUAL SECTION QUANTITY | 1 |
| SECTION DELAY TIME | CN300.000 MILLISECONDS NOMINAL |
| OPERATING TEMP RANGE | -55.0 TO +125.0 DEG CELSIUS |
| DELAY TIME VARIATION PER DEG CELSIUS | 150.000 MICROSECONDS |
| INPUT IMPEDANCE RATING | 1.000 KILOHMS |
| OUTPUT IMPEDANCE RATING | 1.000 KILOHMS |
| ATTENUATION IN DECIBELS | 0.540 |
| VOLTAGE RATING | 600.000 VOLTS MAXIMUM |
| PULSE RISE TIME RATING | 0.02 MICROSECONDS |
| FREQUENCY BANDWIDTH | 18000.0 KILOHERTZ NOMINAL |
| BODY STYLE | RECTANGULAR |
| BODY LENGTH | 3.500 INCHES NOMINAL |
| BODY WIDTH | 0.500 INCHES NOMINAL |
| BODY DEPTH | 0.500 INCHES NOMINAL |
| MATERIAL AND LOCATION | PLASTIC, EPOXY RESIN CASE |
| SURFACE TREATMENT AND LOCATION | ANY ACCEPTABLE CASE |
| TERMINAL TYPE AND QUANTITY | 3 WIRE HOOK |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING FACILITY QUANTITY | 2 |
| HOLE DIAMETER | 0.187 INCHES NOMINAL |
| MOUNTING PROVISION ARRANGEMENT STYLE | 2 POSITION IN-LINE |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 3.187 INCHES NOMINAL |
| TEST DATA DOCUMENT | 94117-292014P1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |