Part Details | DIRECT CURRENT MOTOR
6105-00-921-5194 A motor which is designed for operation from a direct current source. Excludes MOTOR, ENGINE STARTER, ELECTRICAL. See also MOTOR, CONTROL.
Alternate Parts: 63D11138, 6105-00-921-5194, 00-921-5194, 6105009215194, 009215194
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 61 | JAN 24, 1966 | 00-921-5194 | 16350 ( MOTOR, DIRECT CURRENT ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 6105-00-921-5194
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 63D11138 | 18894 | AIR ARMAMENT CENTER/ EN |
Technical Data | NSN 6105-00-921-5194
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 7.760 INCHES |
| OVERALL WIDTH | 5.145 INCHES |
| OVERALL HEIGHT | 3.050 INCHES |
| MOUNTING METHOD | FIXED BASE |
| INCLOSURE FEATURE | GENERAL PURPOSE |
| CURRENT RATING METHOD | LOAD |
| TORQUE RATING AND TYPE | 50.0 INCH-POUNDS STARTING |
| WINDING TYPE | SHUNT WOUND |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 45.0 SECONDS MAXIMUM ON |
| COOLING METHOD | AMBIENT AIR |
| ROTOR SPEED RATING IN RPM | 6500.0 HIGH FULL LOAD |
| SPECIAL FEATURES | SHAFT MATERIAL IS STEEL,QQ-S-624,COMP 4130,THRU HARDENED SPLINE END OF SHAFT TO ROCKWELL C45-48,REST OF SHAFTTO BE ROCKWELL C30-33; PITCH=32/64 IN.; PITCH DIA.=0.3438 IN.; PRESSURE ANGLE=30 DEG.; TOOTH THK.=0.0479 IN.; BASEDIA.=0.2977 IN.; MEASURING PIN DIA.=0.060 IN.; MIN. MEASUREMENT OVER 2 PINS=0.4279 IN.; LG. OF ENGAGEMENT=0.630 IN. |
| SPECIAL TEST FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |
| CRITICALITY CODE JUSTIFICATION | SPCL |