Part Details | ARBITRARY SCALE METER
6625-00-762-2213 An electrically operated instrument which has a marked scale or digital readout display, but the unit of measurement is not given. May indicate electrical or nonelectrical effects but is primarily not a current detecting device; therefore, excludes GALVANOMETER. For instruments whose unit of measurement is not covered by a more specific item, see METER, SPECIAL SCALE.
Alternate Parts: 164341, 16-4341, MR36M200SPECR, MILM1030418, MIL-M-10304/18, 6625-00-762-2213, 00-762-2213, 6625007622213, 007622213
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 66 | JAN 01, 1961 | 00-762-2213 | 16476 ( METER, ARBITRARY SCALE ) |
REFERENCE DRAWINGS & PICTURES
FOUR HOLE/STUD RECTANGULAR/SQUARE
ROUND FLUSH MTG
Cross Reference | NSN 6625-00-762-2213
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 16-4341 | 15309 | JEWELL INSTRUMENTS, LLCDBA MODUTEC USE CAGE CODE 33005 FOR |
| MR36M200SPECR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-M-10304/18 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 6625-00-762-2213
| Characteristic | Specifications |
|---|---|
| INSTALLATION DESIGN | PANEL |
| INDICATOR TYPE | DIAL W/POINTER |
| SCALE MARKING | COUNTS PER MINUTE |
| MOVEMENT TYPE | MOVING IRON VANE |
| MOVEMENT SUSPENSION METHOD | TAUT BAND |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 SOLDERLESS LUG |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1500.0 |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| STYLE DESIGNATOR | ROUND FLUSH MTG |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 2.760 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 0.940 INCHES MAXIMUM |
| OVERALL DIAMETER | 3.500 INCHES MAXIMUM |
| OVERALL LENGTH | 1.800 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM |
| MATERIAL | STEEL |
| SURFACE TREATMENT | ENAMEL LUSTERLESS |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| ENVIRONMENTAL PROTECTION | AIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT |
| SPECIAL MARKINGS | COUNTS PER MINUTE |
| FEATURES PROVIDED | ZERO ADJUSTER |
| SPECIAL FEATURES | WINDOW ONTOP OF FLANGE TO PERMIT EASY READING OF SCALE |
| TEST DATA DOCUMENT | 81349-MIL-M-10304 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-M-10304 TO 18 GOVERNMENT SPECIFICATION |
| FSC APPLICATION DATA | TEST SET ELECTRONIC |