Part Details | DIGITAL READOUT ELECTRONIC COUNTER
6625-01-160-6482 An instrument used to count the frequency of recurrent electronic events and display the count on the panel of the instrument in numeric form. May also include facilities for a readout printed on tape. May include facilities for a very accurate output which can be used as a secondary transfer standard. It can be used to measure frequency, period, time interval, phase angle, frequency ratio, and for multiple period averaging. See also COUNTER, ELECTRONIC, DIGITAL and INDICATOR, DIGITAL DISPLAY.
Alternate Parts: 371OPTP1P2P5, 6625-01-160-6482, 01-160-6482, 6625011606482, 011606482
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 66 | AUG 24, 1983 | 01-160-6482 | 26835 ( COUNTER, ELECTRONIC, DIGITAL READOUT ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 6625-01-160-6482
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 371OPTP1P2P5 | 34257 | EIP MICROWAVE INC |
Technical Data | NSN 6625-01-160-6482
| Characteristic | Specifications |
|---|---|
| MEASUREMENT TYPE | FREQUENCY |
| FREQUENCY RANGE | +20.0 TO +18000000000.0 HERTZ OVERALL |
| ACCURACY RATING | PORM 1 COUNT PORM TIME BASE ERROR |
| GATE TIME | 1.0 SECONDS MINIMUM AND 10.0 MICROSECONDS MAXIMUM |
| INTERNAL CALIBRATION FEATURE | NOT INCLUDED |
| DISPLAY TYPE | LIGHT EMITTING DIODE (L.E.D.). |
| DISPLAY DIGIT QUANTITY | 11 |
| DISPLAY UNITS INDICATOR | NOT INCLUDED |
| DISPLAY POSITIONED DECIMAL POINT | NOT PROVIDED |
| DISPLAY STORAGE FACILITY | NOT INCLUDED |
| REMOTE CONTROL PROVISIONS | NOT INCLUDED |
| SOLID STATE FEATURE | INCLUDED |
| ELECTRICAL CONNECTION QUANTITY | 3 |
| ELECTRICAL CONNECTION TYPE | BNC AND TYPE N AND FEMALE |
| CURRENT TYPE | AC |
| VOLTAGE RATING | 115.0 VOLTS NOMINAL AND 230.0 VOLTS NOMINAL |
| FREQUENCY RATING | 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM |
| WATTAGE RATING IN WATTS | 90.0 |
| INTERNAL BATTERY ACCOMMODATION | NOT INCLUDED |
| OVERALL LENGTH | 499.0 MILLIMETERS NOMINAL |
| OVERALL WIDTH | 425.0 MILLIMETERS NOMINAL |
| OVERALL HEIGHT | 89.0 MILLIMETERS NOMINAL |
| MOUNTING METHOD | BENCH |
| PLUG-IN UNITS PROVISION | INCLUDED |
| STANDARD FREQUENCY OUTPUT FEATURE | NOT INCLUDED |
| ACCESSORY COMPONENT QUANTITY | 3 |
| ACCESSORY CONTROLLING AGENCY | EIP MICROWAVE CO. |
| ACCESSORY COMPONENT NAME | POWER CORD, 8FT WITH INTERNATIONAL PLUG; OPERATING/SERVICE MANUAL; PCB EXTENDER CARD |
| SPECIAL FEATURES | RESOLUTION: SELECTABLE, 1 HZ/1 MHZ; DISPLAY IS SECTIONALIZED TO READ HZ, MHZ, KHZ, GHZ; AUTOMATIC OPERATION AFTER BAND SELECTION; CONTROLS PROVIDED ARE: SAMPLE RATE-100 MS TO 10 SEC, BAND SELECT-BAND 1A,1B,11, OR 111, RESOLUTION-BLANKING OF UP TO SIX LEAST SIGNIFICANT DIGITS, GATE TIME, RESET-RESETS DISPLAY TO ZERO, INIITIIATES NEW READING, TEST-COUNTS/DISPLAYS INTERNAL 10 MHZ TIME BASE, INT/EXT TIME BASE-REARPANEL SWITCH SELECTS TIME BASE REFERENCE, INT POSITION TYPICALLY USED, POWER-APPLIES LINE POWER TO COUNTER; MINUS 30 DBM SENSITIVITY, PLUS 33 DBM (2 WATT) OVERLOAD PROTECTION, MULTIPLE SIGNAL DISCRIMINATION, 40 MHZ TO 200 MHZ FM TOLERANCE; LOCKBOX CAPABILITY; OPTIONS PROVIDE EXTREME ACCURACY MEASUREMENTS FROM 213.0 KHZ TO 1.917 GHZ W ACCURACY OF PORM 1 PPM TO PORM 5 PPM; INJECTS PRECISELY MEASURED SIGNALS INTO THE SUBSYSTEMS AND SUBASSEMBLIES BETWEEN FREQUENCIES OF 1.024 MHZ AND 1.917 MHZ;PROGRAMMABLE PHASE LOCKING OUTPUT LOOPTO A SIGNAL GENERATOR |
| SPECIFIC USAGE DESIGN | ELECTRONIC TEST EQUIPMENT |
| UNPACKAGED UNIT WEIGHT | 29.000 POUNDS |