Part Details | NONMETALLIC CHANNEL
9390-00-004-4540 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: MILG1149, A502, X21031.001, CH274, A502, 9390-00-004-4540, 00-004-4540, 9390000044540, 000044540
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JUN 07, 1972 | 00-004-4540 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-004-4540
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MILG1149 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| A502 | 83473 | PAWLING CORPORATIONDBA PAWLING ENGINEERED PRODUCTS |
| X21031.001 | 83473 | PAWLING CORPORATIONDBA PAWLING ENGINEERED PRODUCTS |
| CH274 | 83473 | PAWLING CORPORATIONDBA PAWLING ENGINEERED PRODUCTS |
| A502 | 78286 | SIKORSKY AIRCRAFT CORPORATIONDBA SIKORSKY |
Technical Data | NSN 9390-00-004-4540
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | 2 OPEN CHANNEL |
| OVERALL HEIGHT | 0.438 INCHES NOMINAL |
| LEFT SIDE FLANGE HEIGHT | 0.391 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.391 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| INSIDE RADIUS | 0.016 INCHES NOMINAL |
| FIRST SLOT/GROOVE DEPTH | 0.406 INCHES NOMINAL |
| OUTSIDE RADIUS | 0.047 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| MATERIAL | |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-1149, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 1000 POUNDS PER SQUARE INCH |
| ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| NONDEFINITIVE SPEC/STD DATA | I TYPE AND 1 CLASS |