NSN 9540-00-018-4649

Part Details | STRUCTURAL BEAM

9540-00-018-4649 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.

Alternate Parts: QQA2008, QQA200-8, 9540-00-018-4649, 00-018-4649, 9540000184649, 000184649

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
95APR 25, 196700-018-464937018 ( BEAM, STRUCTURAL )
REFERENCE DRAWINGS & PICTURES

Z SHAPE

SQUARE END

SQUARE END

SQUARE END

SQUARE END

Cross Reference | NSN 9540-00-018-4649
Part Number Cage Code Manufacturer
QQA200-881348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
Technical Data | NSN 9540-00-018-4649
Characteristic Specifications
MATERIAL1$2
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200 TO 8 FED SPEC 1ST MATERIAL RESPONSE
FABRICATION METHOD EXTRUDED
HEAT TREATMENT T-6 SOLUTION HEAT TREATED AND ARTIFICALLY AGED
LENGTH5.000 FEET MINIMUM AND 24.000 FEET MAXIMUM
BASIC SHAPE STYLE Z SHAPE
OVERALL HEIGHT1.000 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.125 INCHES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS0.125 INCHES NOMINAL
WEB FLANGE THICKNESS0.125 INCHES NOMINAL
TOP FLANGE WIDTH1.125 INCHES NOMINAL
BOTTOM FLANGE WIDTH1.125 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
FIRST TIP STYLE SQUARE END
SECOND TIP RELATIONSHIP TO FIRST TIP IDENTICAL
WEIGHT PER UNIT MEASURE0.450 POUNDS PER LINEAR FOOT
NONDEFINITIVE SPEC/STD DATAT6 TEMPER